Project Life Cycle in Industrial Engineering

From apppm
(Difference between revisions)
Jump to: navigation, search
Line 4: Line 4:
  
 
==Big idea==
 
==Big idea==
This structure of life cycle <ref>http://apppm.man.dtu.dk/index.php/Life_Cycle_Model December 2014 </ref> is often used in industrial engineering, because there is a communication with upper management or other entities less familiar with the details of the projects.  
+
Most of industrial projects follow a Life Cycle Model <ref>http://apppm.man.dtu.dk/index.php/Life_Cycle_Model December 2014 </ref> which have all the time the same structure, with 4 steps: Initiation, Planning, Execution and Closure. This structure is often used in industrial engineering, because there is a communication with upper management or other entities less familiar with the details of the projects. Taken together, these steps represent the road a project takes from the beginning to its end and are generally referred to as the project “Life Cycle”.
 +
The interfaces of the phases form milestones for progress payments and reporting progress to top management, who can then make the decision to abort or provide further funding. Sometime, the production of a prototype begin before the ends of the design, this is known as concurrent engineering and is often employed to reduce the overall project programme.
 +
<ref>Albert Lester. '''“Project Management, Planning and Control”''' – Fifth Edition. Elsevier Ltd. 2007. Page 37 to 39</ref>
  
 
=== Initiation: Starting the project ===
 
=== Initiation: Starting the project ===
Line 35: Line 37:
  
 
==Annotated Bibliography==
 
==Annotated Bibliography==
Project Management Institute (2013). '''A Guide to the Project Management Body of Knowledge (PMBOK® guide)''': This book explain in details the Life Cycle Model.
+
Project Management Institute (2013). '''A Guide to the Project Management Body of Knowledge (PMBOK® guide)''': This book explains in details the Life Cycle Model.
 
+
Albert Lester (2007). '''“Project Management, Planning and Control”''' : This book explains differents methods and model of project management, planning and control.
 
==References ==  
 
==References ==  
 
<references/>
 
<references/>

Revision as of 20:04, 12 February 2018

All projects can be mapped to a generic life cycle structure. A project life cycle is a sequence of steps through from the beginning to the end, they are sequential and, generally in industrial engineering, there are 4 four main phases which are: Initiation, Planning, Execution and Closure. The phases can be broken down by intermediate milestones, specific results or deliverables. The project life cycle also allows for the gate procedure to be used. This is a tried and tested method for delivering projects on time, within budget and to the expected quality targets. The life cycle provides the basic framework for managing the project, regardless of the specific work involved, it is independent from the product life cycle produced by or modified by the project.[1]


Contents

Big idea

Most of industrial projects follow a Life Cycle Model [2] which have all the time the same structure, with 4 steps: Initiation, Planning, Execution and Closure. This structure is often used in industrial engineering, because there is a communication with upper management or other entities less familiar with the details of the projects. Taken together, these steps represent the road a project takes from the beginning to its end and are generally referred to as the project “Life Cycle”. The interfaces of the phases form milestones for progress payments and reporting progress to top management, who can then make the decision to abort or provide further funding. Sometime, the production of a prototype begin before the ends of the design, this is known as concurrent engineering and is often employed to reduce the overall project programme. [3]

Initiation: Starting the project

This phase is where the project objectives are defined and the aspects of the project agreed. It is the phase where a problem is identified and potential solutions suggested. The scope of work is now defined in detail.

Example initiation phasee

Planning: Organizing and preparing

This phase is where the project is broken down into manageable areas of work and planned in terms of time, cost and resources. This is a continuous process and will extend throughout the execution phase of the project.

Example planning phase

Execution: Carrying out the work

During this phase the work is implemented, controlled and monitored.

Example execution phase

Closure: Closing the project

The purpose of the Project Closure Phase is to formally close the project. During Project Closure, there are several key activities that need to be performed...

  • Verify that the completion criteria are met
  • Create a project closure report
  • Collect and archive project artifacts
  • Perform a project postmortem

Example closure phase

Applications

Limitations

It is important to ensure the project life cycle used on your project is appropriate to the work being carried out and split into distinct and manageable phases.

Annotated Bibliography

Project Management Institute (2013). A Guide to the Project Management Body of Knowledge (PMBOK® guide): This book explains in details the Life Cycle Model. Albert Lester (2007). “Project Management, Planning and Control” : This book explains differents methods and model of project management, planning and control.

References

  1. Project Management Institute. “A Guide to the Project Management Body of Knowledge (PMBOK® guide)” Fifth Edition, 2013. Page 38 to 46
  2. http://apppm.man.dtu.dk/index.php/Life_Cycle_Model December 2014
  3. Albert Lester. “Project Management, Planning and Control” – Fifth Edition. Elsevier Ltd. 2007. Page 37 to 39
Personal tools
Namespaces

Variants
Actions
Navigation
Toolbox