QUENSH

QUENSH (QUality, ENvironment, Safety and Health) systems are an extension of the formal QMS (Quality Management Systems, see also Total Quality Management) in the means of health, safety and environmental conformance. The awareness of these issues has been increasingly growing throughout the past couple of decades, making the joint integration of all ISO 9001, ISO 14001 and OHSAS 18001 management systems (also known as QUENSH).

These systems can be set up using Microsoft Word or Excel documentation.

Normal QMS vs. QUENSH

Formal quality management systems (QMS) can be based off of four basic approaches:

• Inspection, or the reliance upon physically checking that work has been completed satisfactorily;
• Quality control (QC), or the reliance on management control techniques to achieve high levels of quality;
• Quality assurance (QA), or the use of externally accredited procedures to ensure that quality management practices are rigorously followed;
• Total quality management (TQM), or the motivation of continuous process improvement to achieve higher and higher levels of conformance to intention.

It is important to note that the formal QMS and QUENSH does not contradict one another, but that QUENSH can be seen as a further development in which the awareness of environment, safety and health is incorporated directly into the quality assessment agenda.

Standards behind QUENSH

A common structure of standards for management systems, drawn up in 2012 and applicable to the new International Organization for Standardization (ISO) standards and future revisions of existing ISO standards. This structure leads to the concept of High Level Structures (HLS), in which certain aspects are met:

• Terminology, text, definitions, titles and the common sequence of the same
• Greater importance given the concept of risk

In particular, all management system standards present:

1. A structure made up of 10 principal points
2. Within each point there are some paragraphs and content, inclusion of which in all the standards is obligatory
3. Where necessary, the individual standards may add specific requirements in relation to their fields of application

Furthermore, and a key element of QUENSH, is the health and safety elements which may consist of the Occupational Health and Safety Assessment (OHSAS) series. This standard was adopted as a British standard by the British Standard Institution (BSI) back in 2008.

Management of quality: ISO 9001:2015

The ISO 9000 series are based on seven Quality Management Principles (QMP).

These are:

QMP 1: Customer focus

QMP 2: Leadership

QMP 3: Engagement of people

QMP 4: Process approach

QMP 5: Improvement

QMP 6: Evidence-base decision making

QMP 7: Relationship management

The ISO-series are being continually revised by standing technical committees and advisory groups, who receive feedback from those professionals who are implementing the standards. Different versions have been made in 1987, 1994, 2000, 2008 and latest 2015, in which the content is:

Section 1: Scope

Section 2: Normative references

Section 3: Terms and definitions

Section 4: Context of the organization

Section 5: Leadership

Section 6: Planning

Section 7: Support

Section 8: Operation

Section 9: Performance evaluation

Section 10: Improvement

Furthermore, the latest 2015 version is less prescriptive than its predecessors and focuses on performance, which was achieved by combining the process approach with risk-based thinking, and employing the Plan-Do-Check-Act (PDCA) cycle at all levels in the organization.

Avoidance of environmental risks: ISO 14001

The ISO 14001 standard, which arguably is the most notable standard to the ISO 14000 series, sets out the criteria for an Environmental Management System (EMS). The ISO 14001 standard shares many common traits with its predecessor, ISO 9000. Just like ISO 9000 the ISO 14000 acts both as an internal management tool and as a way of demonstrating a company’s environmental commitment to its stakeholders including customers and clients. The standard, of which ISO 14001:2015 is the newest, is meant for to help organizations improve resource efficiency, reduce waste and reduce drive down cost.

Different tools has been made in order to accomodate the desire of more green construction projects. An example of this is the tool called EcoProP developed by VTT Building Technology comprised of several methods or so-called exhibits. An example of this is Exhibit 2: Environmental and Sustainability Issues in Construction, which is an approach and tool that can be used for almost any kind of building. The concept builds upon the environmental burdens during the operation of the building in addition to the traditional project boundaries consisting og cost, time and quality.

Exhibit 2: Environmental and Sustainability Issues in Construction is a great example of how the cost-quality-time triangle can be refined - in this case with aspects such as emissions, biodiversity, culutural heritage, etc.

Just like ISO 9001 the ISO 14001 also follows the PDCA cycle.

Management of safety and health: OHSAS 18001

Costs in construction that the British International Standard (BIS) group think can be massively reduced by the introduction of proper international health and safety management systems.

The OHSAS 18000 series consists of two primary specifications; OHSAS 18001 and 18002, which provides requirements for an Occupational Safety and Health (OHS) management system and implementation guidelines, respectively.

The idea of the OHSAS is to help organizations to:

• Identify and control health and safety risks
• Reduce the potential for accidents
• Aid legal compliance
• Improve overall performance

A new international standard called ISO 45001 was meant to come out in 2016, ensuring a better link between all of the international standards. This new international standard was supposed to replace the current OHSAS 18001. The publication date however has due to down voted drafts been postponed to 2018. The reasoning for this delay may be many, however a big concern for many global organizations in regards to developing such an international standard has been how it will affect and work with the current local regulations.

The appliance of QUENSH

Historically, many organizations start with the Quality Management System (QMS) ISO 9001, then add the environment management requirements from ISO 14001. Among other changes the OHSAS 18001 was updated back in July 2007 in order to be more easily aligned with the structures of the ISO 9000 and 14000 series. The change also stated greater emphasis on the “health” component of “health and safety”.

The PDCA model can be used by a wide range of organizations - from manufacturing facilities to service industries to government agencies. Furthermore, many third party companies provide services for businesses wanting e.g. a greener profile.

Environmental appliance

The applications that an organization may follow can be in the form of guidance and/or intructions. As mentioned, some third party companies make a living off of guiding existing companies in different industry sectors. The help they provide can e.g. consist of:

• Establishing environmental management systems, certifiable to BS EN ISO14401
• Environmental baseline reviews such as carbon footprint including reduction methods thereoff
• Legal compliance and risk assessment
• Training of the organizations employees such as terms of environmental awareness
• Communication strategies and campaigns

Furthermore, companies may want to achieve environmental goals, possibly based on both environmental or economic incetives:

• Cleaner technology
• Sustainable construction and construction environmental plans
• Emergency preparedness and response plans
• Green procurement
• Pollution risk assessments including drainage surveys, provision of spill containment and spill response equiment and biological cleaning products
• Producer responsibility obligations for products and waste
• Premises management including facility and energy reviews
• Waste management and minimisation
• Water and waste water management

The idea behind the usage of QUENSH and ISO14000 is in the end to helps companies and organizations with the following, in addition to the potential of creating improved public relations and reduce production costs:[ref ECO]

• Optimizing the use of raw materials, transport, water and energy
• Rationalising and recycling
• Reducing the volume and toxicity of waste, used water and air emissions.

Limitations of QUENSH

When it comes to inspection, QC and QA - and as such also QUENSH systems - all share two important limitations. They are all:

• ... first-order information loops around static standards (reference to Winch, p.180+329) and
• ... systems that are operationally orientated; meaning that they do not take factors such as customer satisfaction into account.

Safety and health: “The Danish/Scandinavian Model” > a lot of influence on the EU standards The Scandinavian model (tri-part system):

EU / government / ministry of employee

The Danish Working Environment Authority The Danish working Environment Council / Authority / The social partner

The National Research Centre for the Working Environment 11 Advisory boards - social partners Clinics for Occupational Environment Private advisors and consultants Universities Certification bureau

The reasoning for the 11 boards and other boards are that different parties need different information > The transport part needs other info than e.g. the constructional engineers

Annotated Bibliography

Table 2: Annotated bibliography

Author	Title	Date	Category	Chapter	Pages	Brief description	Link
Winch, Graham M.	Managing Constructions Projects	2010	Book	Chapter 12	316-345	University litterature on management in constructional engineering. The mentioned chapter enlightens the concept of managing conformance and mentions QUENSH as an extension to more fundamental quality management systems.	-
Wikipedia	Total Quality Management	2016	Homepage	-	-	A short introduction to TQM (as it was in the 1980's)	https://en.wikipedia.org/wiki/Total_quality_management
Houvila, P. & Leionen, J	Environmental management in construction	2000	Paper presented at Project Management Institute Annual Seminars & Symposium, Houston, TX	-	-	Presentation and short descriptions of VTT Building Technology's method EcoProP, explaining six exhibits with environmental management in construction in focus.	https://www.pmi.org/learning/library/environmental-management-construction-8923	-